Push Settings give you the ability to choose the method and frequency of synchronization with the NotifyLink server. There are separate settings for weekdays and weekends. Synchronization can be turned off, set for all day, or set for intervals.
1. From the main NotifyLink menu, select Settings > Push Settings.
2. Select the Access Point. Choose which carrier/network your device will access.
3. Select Yes to enable the Connection Warning or No to disable it. If enabled, the following warning will appear each time NotifyLink attempts to gain network access.
NotifyLink is attempting to open a connection. Do you want to allow this?
4. Select the Push Type. Choose Scheduled Push or Direct Push.
5. Select the push settings (see below).
6. Select Save from the Options popup menu.
|
Scheduled Push Settings | |
|
Weekday Settings |
Select: Disabled, Interval, or All Day Determines when the device will synchronize Mondays through Fridays. |
|
Weekend Settings |
Select: Disabled, Interval, or All Day Determine when the device will synchronize on Saturdays and Sundays. |
|
Frequency |
If you have set weekdays/weekends to All Day or Interval, type in the number of minutes between synchronizations (valid entry=1 to 90 minutes). Default is 5 minutes, resulting in the device synchronizing every 5 minutes. |
|
Start/Stop Times |
If you have set weekdays/weekends to Interval, choose the times you wish the synchronization to start and end. Times must be within one 24-hour period. Defaults are 7:00 to 19:00, resulting in the device synchronizing from 7am to 7 pm. |
|
Direct Push Settings | |
|
Direct Push Max Wait |
Time limit for a direct push session. The time limit is determined by the shortest timeout in the network path. It is recommended that all timeouts in the network path match or exceed the direct push timeout. Default is 15 minutes. |
|
Weekday Settings |
Select: Disabled, Interval, or All Day For Interval, choose the times you wish synchronization to start and end. Times must be within one 24-hour period. Defaults are 7:00 to 19:00, resulting in the device synchronizing from 7am to 7 pm. |
|
Weekend Settings |
Select: Disabled, Interval, or All Day Defaults are the same as for weekday. |